Construction and Accessories

All SLR models include 3 rods per pocket.  There are 6 possible rod positions in each pocket to support different sized literature.

How to move rods:

Retaining Rods: Set of 8 - $4.95 plus shipping.

Optional Shelf Sign Holder

Optional Holder

Standard Shelf Edge

All pockets on the SLR series except the bottom pocket come with an attached shelf edge that rises 1/4 inch. Optional shelf sign holders slip onto the shelf and hold signs 1.25 inches high and 8.5 inches wide.

Standard shelf edge set of 8 - $7.95

Optional Shelf Sign Holders – Eight sign-holder edges $11.95 plus shipping.

Made of thin polystyrene. Insert three fasteners (included) to form a circle with a circumference of approximately 67 inches.  The attached “H Channel ribs” are spaced 11 inches apart to create 6 places to hold standard 8.5 x 11 inch paper signs or photos presented horizontally.  Or, you can form a smooth circle with the ribs on the inside so you can apply your own graphics. One header is included with each SLR-72 and SLR-48.

Circular Sign Header - $18.95

Quality Construction                                          

We use a high grade melamine which is a thermofused plastic on high density particle board.  It is washable and very durable. 

We use a resilient, flexible polyethylene tee molding on all exposed edges.  This product is a little more expensive but will last years longer than glued-on rigid edges.  Most competitors’ edge banding becomes brittle and shows wear from common bumps and nicks.

Our ball bearings are greased and sealed to perform for years in the most challenging environments.  The bearings in the SLR-48 and SLR-72 have a 1000 pound capacity to ensure smooth operation with a fully loaded display.

147 Arrowhead Drive, Building #3 | Manheim, PA 17545 | (717) 653-8070 | (800) 320-2512

designed by PDA Marketing